[ Basic Info | References | User Guide ]
Basic Information on callist
Task: callist
Purpose: List items from calibration data set
Categories: calibration
CALLIST is a MIRIAD task that lists some items in a calibration set.
Key: gcal
Name of the calibration set. No default.
Key: verbose
When set to 'true' is displays information per integration time.
Default: 'false', which only displays when source name changes.
Key: poly
When set to 'true' is displays information of all polynomials
Default: false.
Key: break
When set to 'true' is displays information of all breakpoints
Default: false.
Key: code
Slot code for band/phase/amp to print. Must be 3 or 4
characters. If empty, correllations are not printed.
First character is A(mp) or P(phase).
Second character is U(pper) or L(ower) sideband.
Third character is W(ide) band or any of 1..8 for passband.
Default: Empty, not used.
Key: base
Baseline, combined with slot code specified before, to print.
Valid entries must be of the format A1-A2, where A1 and A2 are
the two antennas.
Default: not used.
Key: time
Relative time with respect to the offset time0 in the gcal file
for which the complex gains/(phases and amplitude) are shown
for each baseline and sideband. Some test calculations
for anntenna based conversions are also shown.
Default: 0.0, meaning, not used.
If a second parameter is used, you need to specify if you want to
see Complex(Re/Im) ['c'] or else Amp/Phase pairs. Default: 'c'
Key: log
Output device. (default is standard user output)