UVCS MISSION LOG ---------------- Date: 16 Jan 2013 ----- Last revision: 18 Mar 2013 (RR) -------------- File Name: 2013.01.16.a.log ---------- Compiled by: R. Rosati ------------ UVCS Activity: Pointing and mirror calibration tests -------------- SOHO Activity: -------------- EOF Staff: R. Rosati: Commander ---------- Command file: 13.01.16.22:31:29.cmd.log Activity: --------- 1) Pointing/mirror calibration test on E limb Sequence: Manual SCI_SPEC: Using pointing stages to off-set point from 2.74 Rsun down to E limb. Used 0.8 mm exposed mirror for this test. After moving pointing stages toward limb 15500 steps no signficant increase in count rate was observed. This test was halted, more mirror was exposed and the test was repeated. We later realized the wrong point stage calibration file was used. We needed to move several thousand more steps to reach the limb. OBS_PROG: Primary: Calibration SCI_OBJ: Primary: Calibration OBJ: Limb, Disk CMP_NAME: CMP_NUM: Duration: start: 2013.01.16.18:30 end: 2013.01.16.20:00 ONUMs = Instrument configuration: - Pointing: Off-set pointing - Spacecraft Roll: 0 Degrees - Roll: 0.0 Degrees (35156) - Mirror/Occulter: 2.74 Ro 0.8 mm exposed mirror - LYA Slit: 50 um - OVI Slit: 50 um - LYA GRTPOS: 68580 - OVI GRTPOS: 128000 - LYA MCP Voltage: 210 - LYA Filter Engaged - LYA mask: LYA_wing_100 in slot 5 Fits Files: 2) Pointing/mirror calibration test on E limb Sequence: Manual SCI_SPEC: Using pointing stages to off-set point from 2.74 Rsun down to E limb. Used 3.16 mm exposed mirror for this test. This test was successful. NRT ended before data could be recorded for tests on the W limb. OBS_PROG: Primary: Calibration SCI_OBJ: Primary: Calibration OBJ: Limb, Disk CMP_NAME: CMP_NUM: Duration: start: 2013.01.16.20:01 end: 2013.01.16.21:30 ONUMs = Instrument configuration: - Pointing: Off-set pointing - Spacecraft Roll: 0 Degrees - Roll: 0.0 Degrees (35156) - Mirror/Occulter: 2.74 Ro 3.16 mm exposed mirror - LYA Slit: 50 um - OVI Slit: 50 um - LYA GRTPOS: 68580 - OVI GRTPOS: 128000 - LYA MCP Voltage: 210 - LYA mask: LYA_wing_100 in slot 5 Fits Files: